Siemens SIMATIC ET 200SP HA User Manual

SIMATIC
ET 200SP HA
F-AI 8xI 2-/4-wire HART HA
Equipment Manual
6DL1136-6AA00-0PH1
09/2021
A5E50557845-AA
Security information
1
Preface
2
Product overview
3
Connection
4
Parameters/address space
5
Applications of the F-I/O
module
6
Displays, alarms and
messages
7
HART function
8
Technical speci󹪝cations
9
HART operating data
records
A
Analog value
representation
B
Response times
C

Siemens SIMATIC ET 200SP HA Specifications

General

Category	I/O Systems
System	SIMATIC ET 200SP HA
Mounting	DIN rail
Protection Rating	IP20
Communication Protocol	PROFINET
Redundancy	Yes
Hot Swapping	Yes
Modularity	Modular
Power Supply	24 V DC
Temperature Range	-40 to 70 °C
Product Type	Distributed I/O
Number of I/O modules	Up to 64
Redundancy Type	system redundancy
Operating Temperature	-40 to 70 °C
Storage Temperature	-40 to 70 °C
Relative Humidity	5% to 95% (non-condensing)
Vibration Resistance	IEC 60068-2-6
Shock Resistance	According to IEC 60068-2-27
Mounting Type	DIN rail

Summary

Security information

Product overview

Properties of I/O module

Details the properties and features of the F-AI 8xI 2-/4-wire HART HA I/O module.

Parameters/address space

Module/channel parameters

Details module/channel specific parameters affecting module or channel configuration.

Explanation of the module/channel parameters

Provides detailed explanations for key module and channel parameters.

Address space

Details the allocation of input and output address space for the I/O module.

Applications of the F-I/O module

Application case 1: SIL3/Cat.3/PLd, 2-wire transmitter, 1oo1

Details wiring and parameter assignment for SIL3/Cat.3/PLd, 2-wire transmitter, 1oo1 application.

Application case 1a: SIL3/Cat.3/PLd, 2-wire transmitter, 1oo1 (high availability)

Details wiring and parameter assignment for redundant SIL3/Cat.3/PLd, 2-wire transmitter, 1oo1.

Application case 2: SIL3/Cat.3/PLd, 4-wire transducer, 1oo1

Details wiring and parameter assignment for SIL3/Cat.3/PLd, 4-wire transducer, 1oo1 application.

Application case 2a: SIL3/Cat.3/PLd, 4-wire transmitter, 1oo1 (high availability)

Details wiring and parameter assignment for redundant SIL3/Cat.3/PLd, 4-wire transmitter, 1oo1.

Application case 3: SIL3/Cat.4/PLe, 2- or 4-wire transducer, 1oo2

Details wiring and parameter assignment for SIL3/Cat.4/PLe, 2/4-wire transducer, 1oo2 application.

Application case 3a: SIL3/Cat.4/PLe, 2- or 4-wire transmitter, 1oo2 (high availability)

Application case 4: SIL3/Cat.4/PLe, 2- or 4-wire transmitter, 2oo3

Requirements placed on sensors for fail-safe modules

Outlines specific requirements for sensors used in fail-safe applications.

IO redundancy

Displays, alarms and messages

Interrupts

Diagnostic messages

Explains diagnostic messages, their meanings, causes, and possible remedies.

Maintenance events

HART function

HART system connection

Communication

Technical specifications

Technical specifications

Provides detailed technical data, electrical specifications, and environmental conditions.