Need help?Do you have a question about the Siemens SIMATIC ET 200SP DI 8x24VDC ST and is the answer not in the manual?
General| Module Type | Digital input module |
|---|---|
| Product Type Designation | DI 8x24VDC ST |
| Number of Inputs | 8 |
| Input Voltage | 24 V DC |
| Weight | approx. 30 g |
| Connection Method | Push-in terminals |
| Degree of Protection | IP20 |
| Dimensions | 15 mm x 73 mm x 58 mm |
| Cable Length, Max | 1000 m |
| Operating Temperature | -30 to +60 °C |
| Compatible Base Unit | Type A0, A1 |
| Status Display | LEDs for channel status |
| Diagnostics | Yes |
Contains the complete documentation for the SIMATIC ET 200SP distributed I/O system in one file.
Personal workspace for Industry Online Support to store, filter, and manage requests.
Allows creating personal manuals by combining documentation parts and exporting them.
Provides access to product data and allows creating custom download packages for CAx/CAe systems.
Offers tools and examples for automation tasks, showcasing component interplay.
Tool to select, configure, and order devices for Totally Integrated Automation (TIA).
Facilitates commissioning and maintenance of SIMATIC S7 stations via bulk operations.
Software for PROFINET network analysis, including topology overview and IO check.
Siemens Network Planner for professional dimensioning of PROFINET automation systems and networks.
Details the technical properties of the SIMATIC ET 200SP digital input module, including article numbers.
Lists accessories that must be ordered separately for the module, such as labeling strips.
Provides references to additional information on the ET 200SP distributed I/O system manual.
Describes the block diagram and terminal assignments for various wiring connections of the module.
Shows block diagram and terminal assignment for 1-wire and 2-wire transducer connections.
Shows block diagram and terminal assignment for 3-wire transducer connections.
Explains requirements for wire-break detection and parallel resistor connection for monitoring.
Lists and describes settable parameters and their default values for module configuration in STEP 7.
Provides detailed explanations for module parameters like diagnostics, input delay, and potential groups.
Details configuration options and address space assignment for the module in the process image.
Describes the LED indicators on the module for status and error reporting.
Explains the specific meanings of the DIAG, Channel status, and PWR LEDs on the module.
Outlines the types of diagnostic interrupts supported by the digital input module.
Details diagnostic alarms, their error codes, meanings, and remedies for troubleshooting.
Presents the technical specifications of the DI 8x24VDC ST module as of 02/2019.
Specifies the rated, minimum, and maximum supply voltage for the module.
Details the current consumption and encoder supply characteristics of the module.
Defines the input voltage ranges for signal '0' and signal '1'.
Specifies the parameterizable input delay times for signal changes.
Lists the operating temperature ranges for horizontal and vertical installation.
Explains how to assign and the structure of parameter data records for module configuration.
Details the byte-by-byte structure of data record 128 used for module parameterization.
Shows how to set parameters for channels 0 to 7 using specific bits and byte structures.
Lists error codes and solutions for issues encountered during data record transfer.
To Next Page