Siemens SIMATIC ET 200SP DI 8x24VDC ST - Accessories; See also

Product overview
2.1 Properties
Digital input module DI 8x24VDC ST (6ES7131-6BF01-0BA0)
Manual, 02/2019, A5E03574157-AF
11
Properties
The module has the following technical properties:
● Digital input module with 8 inputs
● Supply voltage L+
● Sink input (PNP)
● Configurable input delay 0.05 ms to 20 ms (per channel)
● Configurable diagnostics (per module)
● Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131,
type 1 and 3
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
Function
HW
ver-
sion
FW
version
STEP 7
GSD file
TIA Portal
V5.x
PROFINET IO
PROFIBUS DP
Identification data I&M0 to
I&M3
FS01 V0.0.0
and
higher
V14 or higher with
HSP 0222
V5.5 SP3 or high-
er with HSP 0229
V7.0
X X
Configuration in RUN FS01 V0.0.0
and
higher
V14 or higher with
HSP 0222
V5.5 SP3 or high-
er with HSP 0229
V7.0
X X
PROFIenergy FS01 V0.0.0
and
higher
V14 or higher with
HSP 0222
V5.5 SP3 or high-
er with HSP 0229
V7.0
X X
Value status FS01 V0.0.0
and
higher
V14 or higher with
HSP 0222
V5.5 SP3 or high-
er with HSP 0229
V7.0
X X
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You will find additional information on the accessories in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/en/58649293
) system manual.