Siemens SIMATIC ET 200SP 6ES7134-6GD01-0BA1 - Technical Specifications; Technical specifications

Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD01-0BA1)
Equipment Manual, 06/2020, A5E03551866-AF
26
Technical specifications
6
6.1 Technical specifications
Technical specifications of the AI 4×I 2-/4-wire ST
The following table shows the technical specifications as of 06/2020. You will find a data
sheet including daily updated technical specifications on the Internet
(https://support.industry.siemens.com/cs/ww/en/pv/6ES7134-6GD01-0BA1/td?dl=en).
Article number
6ES7134-6GD01-0BA1
General information
Product type designation AI 4xI 2-/4-wire ST
HW functional status From FS02
Firmware version
• FW update possible
Yes
usable BaseUnits
BU type A0, A1
Color code for module-specific color identifica-
tion plate
CC03
Product function
• I&M data
Yes; I&M0 to I&M3
• Isochronous mode
No
• Measuring range scalable
No
Engineering with
• STEP 7 TIA Portal configurable/integrated
as of version
V14 / -
• STEP 7 configurable/integrated as of ver-
sion
V5.6 and higher
• PCS 7 configurable/integrated as of version
V8.1 SP1
• PROFIBUS as of GSD version/GSD revi-
sion
One GSD file each, Revision 3 and 5 and higher
• PROFINET as of GSD version/GSD revi-
sion
GSDML V2.3
Operating mode
• Oversampling
No
• MSI
No
CiR – Configuration in RUN
Reparameterization possible in RUN
Yes
Calibration possible in RUN
No