Technische Änderungen vorbehalten. Zum späteren Gebrauch aufbewahren.
Subject to change without prior notice. Store for use at a later date.
3ZX1012-0RK13-8HA1
© Siemens AG 2016
This declaration is an attestation of conformity with the indicated statutory requirements but does not imply any guarantee of quality or durability.
The safety instructions of the accompanying product documentation shall be observed.
Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Jim Hagemann Snabe;
Managing Board: Roland Busch, Chairman, President and Chief Executive Officer; Ce drik Neike, Matthias Rebellius, Ralf P. Thomas, Judith Wiese; Registered offices: Berlin
and Munich, Germany; Commercial registries: Berlin-Charlottenburg, HRB 12300, Munich, HRB 6684; WEEE-Reg.-No.
DE 23691322
UK De c laratio n of Conformity
Product identification:
SIMATIC ET 200SP Motor Starter und Accessories
3RK1308-0C, 3RK1308-0D, 3RK1908
Manufacturer:
Siemens AG, SI EP EMS
Address:
DE-92220 Amberg
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant statutory requirements:
Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 2016
(S.I. 2016 No. 1107), and related amendments
Supply of Machinery (Safety) Regulations 2008 (S.I. 2008 No. 1597), and related amendments
Electromagnetic Compatibility Regulations 2016 (S.I. 2016 No. 1091), and related amendments
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
(S.I. 2012 No. 3032), and related amendments
UKEX marking: 0359 II (2) GD
Designated standards used or technical specifications in relation to which conformity is declared:
Reference number / Date of issue Reference number / Date of issue
EN 60947-4-2:2012 EN ISO 13849-1:2015
EN 60947-4-3:2014 EN IEC 62061:2021
EN IEC 63000:2018 EN 50495
:2010
This declaration is an attestation of conformity with the indicated statutory requirements but does not imply any guarantee of quality or durability.
The safety instructions of the accompanying product documentation shall be observed.
Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Jim Hagemann Snabe;
Managing Board: Roland Busch, Chairman, President and Chief Executive Officer; Ce drik Neike, Matthias Rebellius, Ralf P. Thomas, Judith Wiese; Registered offices: Berlin
and Munich, Germany; Commercial registries: Berlin-Charlottenburg, HRB 12300, Munich, HRB 6684; WEEE-Reg.-No.
DE 23691322
Name, address of authorized person to compile the technical file: Siemens plc
Manchester M20 2UR, UK
Name, address of the independent conformity assessment body: TÜV SÜD Certification and Testing (China) Co., Ltd.
No. 10, Huaxia Rd. (m), Xishan District, Wuxi,
Jiangsu, P. R. China
Number of the certificate of the independent conformity assessment body: M8BUK 038717 0089 Rev. 00
Name, identification number of the EU notified body: TÜV SÜD Product Service GmbH, Kenn-Nr. 0123
Number of the EU type-examination certificate: TPS 17 ATEX 38717 060 X
Name, identification number of
the UK approved body: Intertek Testing & Certification Limited,
assessment of quality assurance system identification number 0359
Signed for and on behalf of:
Siemens Aktiengesellschaft
Amberg _______________________ 2023-02-14
Place Date of issue
Dr. Klaus Orth Christian Grosch
Head of Research & Developm ent Head of Quality Management
i.V. i.V.
Name / function signature Name / function signature
To Previous Page
Loading...
Need help?
General
