To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC HMI KTP700F Mobile and is the answer not in the manual?
General| Display Size | 7 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Power Supply | 24 V DC |
| Operating Temperature | 0 to 50 °C |
| Processor | ARM Cortex-A8 |
| RAM | 256 MB |
| Flash | 256 MB |
| Operating System | Windows Embedded Compact 7 |
| Weight | 1.2 kg |
| Display Type | TFT |
| Number of Colors | 16 million colors |
| Communication Interfaces | Ethernet, USB |
| Protection Class | IP65 (front), IP20 (rear) |
Specifies the necessary configuration software for the HMI devices.
Defines key terms related to fail-safe operation and safety requirements.
Details compatibility between Mobile Panels and connection boxes.
Provides essential safety guidelines for operating, configuring, and commissioning the HMI device.
Outlines measures for securing HMI devices against unauthorized access.
Emphasizes the necessity of performing a risk assessment for fail-safe systems.
Details critical information and procedures related to the emergency stop/stop button.
Provides crucial notes on operating the enabling button, especially in setup modes.
Step-by-step guide for connecting the Mobile Panel, including memory cards and cables.
Instructions for connecting various cables and ensuring proper electrical connections.
Details the operation and function of the integrated enabling button.
Provides instructions and safety notes for using the emergency stop/stop button.
Explains how to activate security mode to protect the device from unauthorized access.
Provides an overview of the Control Panel and its functions for device configuration.
Details on assigning a unique PROFIsafe address for fail-safe communication.
Describes how to assign fail-safe modes to connection boxes for safety functions.
Details on configuring the project in WinCC, including adding controllers and HMI devices.
Instructions for configuring fail-safe function blocks (F-FBs) in STEP 7.
Instructions for transferring projects from the configuration PC to the HMI device.
Procedures for backing up and restoring data using PC, external storage, or ProSave.
Procedure for connecting the cable to a connection box and starting the project.
Instructions for safely unplugging the connecting cable, including logoff procedures.
Describes safety-related dialogs like "End PROFIsafe communication" and error messages.
Lists plant-related and safety standards that the device meets.
Specifies reaction times and safety characteristics for fail-safe operations.
Information on Fail-Safe Function Blocks (F-FBs) for Mobile Panels.
Covers common error cases like HMI not starting, internal errors, and communication errors.
Describes safety-relevant symbols used on the device and in documentation.
