To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC HMI KTP400F Mobile and is the answer not in the manual?
General| Resolution | 480 x 272 pixels |
|---|---|
| Processor | ARM Cortex-A8 |
| Weight | 0.6 kg |
| Power Supply | 24 V DC |
| Mounting Type | Panel mount |
| Display Size | 4.3 inches |
| Display Type | TFT |
| Operating System | Windows CE |
| Communication | PROFINET |
| USB | USB 2.0 |
| Protection Class | IP65 |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 60 °C |
| Relative Humidity | 10 to 90 % |
Description of the second generation SIMATIC HMI Mobile Panels for mobile operation.
Definition of terms related to fail-safe operation with fail-safe HMI devices.
General safety regulations and procedures for operating and configuring the device.
Guidelines for managing security and protecting administrator accounts.
Requirements and rules for performing risk assessments in F-systems.
Details on emergency stop/stop button functionality, wiring, and bypass.
Notes on operating the enabling button, setup mode, and process monitoring.
Instructions for mounting position, cutout, clearance, and fastening.
Guidelines for mounting position, clearance, and fastening.
Information and sequence for connecting the Mobile Panel, including SD card insertion.
Connection information, sequence, and procedures for opening/closing boxes.
Procedure for connecting and unplugging the Mobile Panel connecting cable.
Description and function of keyswitches, function keys, and illuminated pushbuttons.
Details on operating the integrated enabling button with its three settings.
Information on the optional emergency stop/stop button and its functions.
Procedure to check operational readiness after connecting the cable and testing functions.
Information on protecting desktop icons, taskbar, and Start Center buttons from unauthorized access.
How to open the Control Panel and its overview of functions.
Procedure to calibrate the touch screen to prevent operating errors.
Situations requiring a restart and notes on data loss.
Procedure to enable PROFINET communication and configure device name.
Setting up time synchronization with a time server using Network Time Protocol.
Assigning a unique PROFIsafe address for communication with F-CPU.
Configuring HMI device for data communication in a PROFINET network.
Assigning fail-safe mode to a connection box based on operating mode specifications.
Performing backup, restore, OS update, and project loading operations.
Steps for adding controllers and Mobile Panels to a WinCC project.
Procedure for configuring F-FBs (Fail-safe Function Blocks) in STEP 7.
Setting up connection point recognition and zones for specific plant areas.
Steps for configuring data channels, setting transfer mode, and starting transfer.
Procedures for backing up and restoring data with PC, external storage, or ProSave.
Procedure for updating the HMI device operating system using ProSave.
Procedure to reset the HMI device to factory settings using ProSave.
Information on direct keys, their function, and LED behavior.
Procedure for connecting the cable and assigning operating modes.
Steps for unplugging the connecting cable for PROFIsafe and hardwired systems.
Explanation of dialogs like 'End PROFIsafe communication' and 'Fatal Error'.
Procedure for replacing the HMI device with identical or different construction.
Information on controller connections and compatible controllers.
Information on using Fail-safe Function Blocks (F-FBs) for Mobile Panels.
Guidance on common error cases like HMI not starting, internal, or communication errors.
