SIMATIC 3964R protocol for Windows 9x/XP/7
Installation Manual, 01/2013, J31069-D0131-U001-A2-7218
5
Introduction
1
Purpose of this document
This manual contains information on the installation and parameter assignment of the
"3964R" driver and on programming applications based on the supplied files. With the help
of the driver and the supplied header and library files, you can program your own
applications to allow communication between Windows PCs and the connected RFID
systems.
To install the driver you need to know the Windows version being used Windows XP or
Windows 7. To program applications you need to be familiar with the programming
languages listed below.
The 3964R driver is implemented as a "DLL" file. To configure the driver functionality there is
also an application for the Control Panel in the form of a "CPL" file. You will find the
installation files on the DVD "RFID Systems, Software & Documentation" (order number:
6GT2080-2AA20).
● File name of the driver DLL: 3964R.DLL
● File name of the configuration program: CPL3964R.CPL
Programming environment
● Microsoft Visual C++ 6.0, VisualStudio 2010 (C++)
● other C environments with modified header file
To Next Page
Loading...
Need help?
General