Siemens SIMATIC IPC MD-34A Quick Start Guide

SIMATIC IPC MD-34A Battery Charger
4 A5E52426055-AA, 05/2023
Procedures
1. Put the battery connector down and align the battery edge to the sideway on charging slot. Insert the battery pack until the
battery connector is firmly connected to the charging pins.
2. The charging station beeps when the battery is well detected (buzzer default off). The LED in-dicator will then turn to AMBER
and the battery charger will start charging automatically.
Removing the Battery Pack
Perform the following steps:
1. The LED indicator turns to GREEN when the battery capacity is higher than 95% full.
2. The battery charger will stop charging when the battery packs are full charged.
3. Remove the battery pack directly.
SIMATIC IPC MD-34A Battery Charger
A5E52426055
-AA, 05/2023
Siemens AG
Digital Industries
Postfach 48 48
90026 NÜRNBERG
GERMANY

Siemens SIMATIC IPC MD-34A Specifications

General

Brand	Siemens
Model	SIMATIC IPC MD-34A
Category	Industrial Equipment
Language	English