Siemens SIMATIC NET CP 342-5 - Requirements for Use; 2.1 Operation in Control Device Families; 2.2 Project Engineering

CP 342-5 / CP 342-5 FO
Manual, 10/2011, C79000-G8976-C146-09
11
Requirements for use
2
2.1 Operation in control device families
SIMATIC device families
You can operate the CP in the following device families:
● SIMATIC S7-300 stations with the following CPU types:
– Standard
– Compact
– Modular
● SIMATIC C7 compact units in C7 packaging system
● SINUMERIK
2.2 Project engineering
Configuration and downloading the configuration data
It is possible to download the configuration data to the CP via MPI or PROFIBUS. The
following version of STEP 7 is required:
STEP 7 version Functions of the CP
STEP 7 as of V5.1 The functional range of the following CP type can
be configured:
 6GK7 342−5DA02−0XE0
 6GK7 342−5DF00−0XE0
 STEP 7 as of V5.4.5 with Hotfix 4 and HSP
1049
 STEP 7 as of V5.5.2
 STEP 7 Professional V11
The functional range of the following CP type can
be configured:
 6GK7 342−5DA03−0XE0.
Depending on what is available on your PG / PC and the S7-300 station, use one of the following
connectors to load the configuration data: MPI, Industrial Ethernet or PROFIBUS.