Siemens SIMATIC NET CP 342-5 - Certifications and Approvals; Approvals of the CP 342-5; CP 342-5 FO; EU Declaration of Conformity

CP 342-5 / CP 342-5 FO
Manual, 10/2011, C79000-G8976-C146-09
45
Certifications and approvals
A
Approvals of the CP 342-5 / CP 342-5 FO
WARNING
Information on standards and approvals
Before you put the device into operation, read the information on standards and approvals
in Part A of this manual /1/ (Page 47).
The CP has the following approvals or conforms to the following directives:
● IEC 61131-2
● CE mark
● EMC directive for an industrial environment
– emission: EN 61000-6-4 : 2007
– immunity: EN 61000-6-2 : 2005
● Explosion protection directive (KEMA)
● EC machinery directive
● UL 508
● CSA C22.2 No. 142
● UL 1604 / UL 2279 Pt. 15 cULus HazLoc Class I, Div. 2 / Class I, Zone 2, T4 or
ANSI/ISA 12.12.01 cULus HazLoc Class I, Div. 2 / Class I, Zone 2, T4
● FM 3611
Class I, Division 2, Group A, B, C, D T4 or
Class I, Zone 2, Group IIC, T4
● ATEX 94/9 EG
II 3G Ex nA II T4 (Zone 2)
● C-TICK
Note
The approvals that apply to the device are printed on the device.
EU declaration of conformity
You will find the EU declaration of conformity for this product on the Internet under the
following entry ID: