Siemens SIMATIC NET CP 342-5 - Page 13

Requirements for use
2.3 Programming
CP 342-5 / CP 342-5 FO
Manual, 10/2011, C79000-G8976-C146-09
13
Further information
● On programming and use of the CP as DP master or DP slave
On initializing the CP as DP master or DP slave and on the running of the program, see
/1/ (Page 47)
● Interfaces an
d program sequence
Refer to the documentation of the program blocks in the online help of STEP 7 or in the
manual /4/ (Page 48)