Certification
6.1.10RoHS
• Radiocommunications (Compliance Labelling – Electromagnetic Radiation)
Notice 2003 made under Section 182 of the Radiocommunications Act 1992
• Telecommunications Labelling (Customer Equipment and Customer Cabling)
Notice 2001 made under Section 407 of the Telecommunication Act 1997
The device is marked with an RCM symbol to indicate compliance when sold in the
Australian region.
A copy of the Declaration of Conformity is available via Siemens Industry Online
Support at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.10 RoHS
This device is declared by Siemens Canada Ltd. to meet the requirements of the
following RoHS (Restriction of Hazardous Substances) directives for the restricted use
of certain hazardous substances in electrical and electronic equipment:
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
A copy of the Material Declaration is available online at https://
support.industry.siemens.com/cs/ww/en/view/109738831.
6.1.11 Other Approvals
This device meets the requirements of the following additional standards:
• IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
• IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
• IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General
Requirements
• NEMA TS-2
Traffic Controller Assemblies with NTCIP Requirements
RUGGEDCOM RS900
Installation Manual, 04/2022, C79000-G8976-1024-14
35
To Next Page
Loading...
Need help?
General