To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC NET S7-1200 and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Protection class | IP20 |
| Product type designation | S7-1200 |
| Transfer rate | 10/100 Mbit/s |
| Number of ports | 4 |
| Power consumption | 2.5 W |
| Operating temperature | 0 °C to 60 °C |
| Mounting type | DIN rail |
| Switching capacity | 1 Gbps |
Details supported communication services like DNP3 and IEC 60870-5 protocols.
Lists required hardware and firmware versions for DNP3 and IEC setups.
Specifies necessary configuration and online function software, like STEP 7 versions.
Details the function and meaning of various LEDs on the module.
Describes power supply and Ethernet interface connections.
Provides specific warnings for explosion hazards and hazardous environments.
Details ATEX requirements for enclosures and operational conditions.
Outlines UL HazLoc suitability and warnings for hazardous locations.
Covers required information for master addressing and VPN connections.
Details configuring modules, networks, redundant systems, and steps in STEP 7.
Explains configuring user data, PLC tags, and sending e-mail notifications.
Lists supported data point types for DNP3 and IEC protocols with S7 data types.
Covers data storage, transmission types, event classification, and triggers.
Provides detailed configuration notes for communication, SNMP, and Ethernet interface options.
Outlines available diagnostics methods like LEDs, STEP 7 tabs, and online functions.
Explains how to find and download new firmware versions for the CP.
