Siemens SIMATIC NET S7-1200 User Manual

Configuration and operation
5.5 Datapoint types
CP 1243-1 DNP3, CP 1243-1 IEC
Operating Instructions, 02/2014, C79000-G8976-C312-02
35
5.5
Datapoint types
During the configuration of the user data to be transferred by the CP, each data point is
assigned a protocol-specific data point type. The data point types supported by the CP along
with the compatible S7 data types are listed below. They are grouped according to format
(memory requirements).
The direction relates to the direction of transfer (monitoring direction = "in", control direction
= "out").
CP 1243-1 DNP3: Supported data point types
Table 5- 1 Supported data point types, DNP3 object groups, variants and compatible S7 data types
Format (memory
requirements)
Data point type
DNP3 object group
[variations]
Direction
S7 data types
Address area
Bit
Binary Input
1 [1, 2]
in
BOOL
I, Q, M, DB
Binary Input Event
2 [1, 2]
in
BOOL
I, Q, M, DB
Binary Output
1)
10 [2]
out
Binary Output Event
1)
11 [1, 2]
out
Binary Command
12 [1]
out
BOOL
I, Q, M, DB
Integer (16 bits)
Counter Static
20 [2]
in
UINT, WORD
I, Q, M, DB
Frozen Counter
2)
21 [2, 6]
in
Counter Event
22 [2, 6]
in
UINT, WORD
I, Q, M, DB
Frozen Counter Event
3)
23 [2, 6]
in
Analog Input
30 [2]
in
INT
I, Q, M, DB
Analog Input Event
32 [2]
in
INT
I, Q, M, DB
Analog Output Status
4)
40 [2]
out
Analog Output
41 [2]
out
INT
I, Q, M, DB
Analog Output Event
4)
42 [2, 4]
out
Integer (32 bits)
Counter Static
20
[1] in UDINT,
DWORD
I, Q, M, DB
Frozen Counter
2)
21 [1, 5]
in
Counter Event
22
[1, 5] in UDINT,
DWORD
I, Q, M, DB
Frozen Counter Event
3)
23 [1, 5]
in
Analog Input
30 [1]
in
DINT
I, Q, M, DB
Analog Input Event
32 [1]
in
DINT
I, Q, M, DB
Analog Output Status
4)
40 [1, 3]
out
Analog Output
41 [1]
out
DINT
I, Q, M, DB
Analog Output Event
4)
42 [1]
out
Floating-point number
(32 bits)
Analog Input
30 [5]
in
REAL
Q, M, DB
Analog Input Event
32 [5, 7]
in
REAL
Q, M, DB
Analog Output Status
4)
40 [3]
out
Analog Output
41 [3]
out
REAL
Q, M, DB
Analog Output Event
4)
42 [5, 7]
out

Siemens SIMATIC NET S7-1200 Specifications

General

Supply voltage	24 V DC
Protection class	IP20
Product type designation	S7-1200
Transfer rate	10/100 Mbit/s
Number of ports	4
Power consumption	2.5 W
Operating temperature	0 °C to 60 °C
Mounting type	DIN rail
Switching capacity	1 Gbps