Siemens SIMATIC NET Series User Manual

SCALANCE W1788-x
1.3 General approvals
Approvals SCALANCE W1700 802.11ac
14 Reference Manual, 11/2018, C79000-G8976-C487-02
1.3
General approvals
ATEX (explosion protection directive)
WARNING
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that
the associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous
Area".
You will find this document
• on the data medium that ships with some devices.
• on the Internet pages under Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/
).
Enter the document identification number C234 as the search term.
The SIMATIC NET products meet the requirements of the EU Directive 2014/34/EU
"Equipment and Protective Devices for Use in Potentially Explosive Atmospheres".
Note
Type of protection of the device
The devices are approved for various types of protection. You can find the type of protection
of your device and the ATEX certificate number on the nameplate.

Siemens SIMATIC NET Series Specifications

General

Product Type	Network Card
Interface Type	Ethernet
Communication Protocol	PROFINET, Ethernet/IP
Connector Type	RJ45
Operating Temperature	0°C to 60°C
Protocols	TCP/IP, UDP, SNMP
Power Supply	24V DC
Certifications	CE, UL, FCC