Siemens SIMATIC NET Series User Manual

SCALANCE W1788-x
1.4 National approvals
Approvals SCALANCE W1700 802.11ac
Reference Manual, 11/2018, C79000-G8976-C487-02
19
1.4
National approvals
The following table lists the countries in which the SCALANCE W1780 product is approved.
The diamond symbol (♦) identifies all countries or frequency ranges for which there was no
approval at the time these operating instructions were written.
The current status of the approvals can be found on the Internet at the following address:
Approvals (https://www.siemens.com/wireless-approvals
).
Column
Meaning
Country
Country
Mode IEEE 802.11 standard and the TPC and / or DFS functionality, where required
CH
Channel
MHz
Frequency
PWR (EIRP)
Maximum permitted effective isotropic radiated power
MaxAntGain
Maximum permitted antenna gain
Use
Permitted use indoors and / or outdoors

Siemens SIMATIC NET Series Specifications

General

Product Type	Network Card
Interface Type	Ethernet
Communication Protocol	PROFINET, Ethernet/IP
Connector Type	RJ45
Operating Temperature	0°C to 60°C
Protocols	TCP/IP, UDP, SNMP
Power Supply	24V DC
Certifications	CE, UL, FCC