Siemens SIMATIC OP 177B - User Manual

Migration Guide Comfort Panels
_
_________________
_
_
_________________
_
_
_________
_
________
_
_________________
_
_
_________________
_
SIMATIC HMI
HMI devices
Migration Guide Comfort Panels
Getting Started
03/2011
A5E03478626-01
Introduction
1
Replacing an HMI device
2
Migrating a project
3
Commissioning the HMI
device
4
Data transfer from STEP 7
5

Siemens SIMATIC OP 177B Specifications

General

Brand	Siemens
Model	SIMATIC OP 177B
Category	Control Panel
Language	English

Summary

Introduction

1.4 Replacing the predecessor device with a Comfort HMI device

Provides a table for selecting suitable replacement Comfort HMI devices.

Replacing an HMI device

2.1 Overview of HMI devices

Describes differences in design and operating concept of HMI devices.

2.2 Mounting cut-out

Compares dimensions for mounting cut-out, device depth, and enclosure front.

2.3 Interfaces

Details the location and type of interfaces for HMI devices.

2.4 Slots for memory cards

2.5 Mapping of the soft key assignment

Migrating a project

3.2 Migrating a project

3.3 Switching screen from 4:3 to Widescreen

Explains adapting screens to the widescreen format.

3.4 Switching over the HMI device

3.5 Setting the address of the HMI device

Commissioning the HMI device

4.2 Transferring a project

Details the procedure for transferring a project to the HMI device.

4.3 Using automatic backup