Siemens SIMATIC OP 77B User Manual

Migration Guide Comfort Panels
_
_________________
_
_
_________________
_
_
_________
_
________
_
_________________
_
_
_________________
_
SIMATIC HMI
HMI devices
Migration Guide Comfort Panels
Getting Started
03/2011
A5E03478626-01
Introduction
1
Replacing an HMI device
2
Migrating a project
3
Commissioning the HMI
device
4
Data transfer from STEP 7
5

Siemens SIMATIC OP 77B Specifications

General

Display Size	5.7 inch
Display Resolution	320 x 240 pixels
Touchscreen	Yes
Keypad	Yes
Power Supply	24 V DC
Memory	256 KB
Communication Ports	RS-485
Operating Temperature	0°C to 50°C
Protection Class	IP65
Storage Temperature	-20°C to 60°C

Summary

Replacing HMI Devices

Mounting Cut-outs and Dimensions

Provides dimensions for mounting cut-outs, device depth, and enclosure fronts.

HMI Interfaces and Connectivity

Migrating HMI Projects

Project Migration Overview and Memory

Step-by-Step Project Migration

Outlines the procedure for migrating a WinCC flexible project to a new HMI project.

Switching Screen Format (4:3 to Widescreen)

Details settings for adapting screens from 4:3 to widescreen format.

Screen Changeover Adaptation Options

Explains adaptation methods like 'None', 'Fit width/height', 'Adapt width', 'Adapt height'.

Switching Over the HMI Device

Using Energy-Saving Functions

Commissioning Comfort HMI Devices

Transferring Projects to HMI Device

Explains connecting and transferring a configured project to the HMI device.

Activating Automatic Backup Feature

Describes activating continuous, automatic backup to the system memory card.

Data Transfer from STEP 7

Principles of STEP 7 Tag Transfer

Scenario: Updating to WinCC V11