Siemens SIMATIC OP 277 User Manual

Migration Guide Comfort Panels
_
_________________
_
_
_________________
_
_
_________
_
________
_
_________________
_
_
_________________
_
SIMATIC HMI
HMI devices
Migration Guide Comfort Panels
Getting Started
03/2011
A5E03478626-01
Introduction
1
Replacing an HMI device
2
Migrating a project
3
Commissioning the HMI
device
4
Data transfer from STEP 7
5

Siemens SIMATIC OP 277 Specifications

General

Brand	Siemens
Model	SIMATIC OP 277
Category	Control Panel
Language	English

Summary

Introduction

1.4 Replacing the predecessor device with a Comfort HMI device

Provides a table to determine the suitable replacement Comfort HMI device for predecessor devices.

Replacing an HMI device

2.1 Overview of HMI devices

2.2 Mounting cut-out

Compares enclosure dimensions and mounting cut-outs for predecessor and Comfort HMI devices, including compatibility.

2.3 Interfaces

2.4 Slots for memory cards

2.5 Mapping of the soft key assignment

2.6 Data input

Migrating a project

3.2 Migrating a project

3.3 Switching screen from 4:3 to Widescreen

Details screen adaptation from 4:3 to widescreen, covering overview, adaptation methods, recommendations, and options for pictograms.

3.4 Switching over the HMI device

Explains how to switch the HMI device in WinCC, covering project transfer and color settings.

3.5 Setting the address of the HMI device

Details how to set IP addresses for HMI devices centrally in WinCC V11.

3.6 Using energy-saving functions

Commissioning the HMI device

4.2 Transferring a project

Details the procedure for transferring a configured project from the PC to the HMI device via USB.

4.3 Using automatic backup