To Next PageTo Next Page
Need help?Do you have a question about the Siemens simatic hmi op27 and is the answer not in the manual?
General| Resolution | 320 x 240 pixels |
|---|---|
| Power Supply | 24 V DC |
| Operating Temperature | 0 to 50 °C |
| Protection Class | IP65 (front), IP20 (back) |
| Display Type | LCD |
| Display Size | 5.7 inches |
| Keypad | Yes |
| Backlight | Yes |
| Communication Ports | RS-232, RS-485 |
| Communication Interface | MPI |
Details the features, installation possibilities, and configuration of the Operator Panels OP27 and OP37.
Provides an overview of the functions of OP27 and OP37, covering event/alarm messages, logging, and archives.
Describes the operating concept, screen partitioning, fixed and main areas, and icons for operator panels.
Details password levels, access permissions, and procedures for logging in, out, and managing passwords.
Covers message types, display modes, archiving, deletion, and printing of messages on the operator panel.
Describes how to configure general settings like operating mode, display, message logging, and date/time.
Covers installation locations, conditions, degree of protection, and cautions for OP27 and OP37 mounting.
Details electrical connections, EMC compatibility, reverse battery protection, and power supply requirements.
Explains the steps for initial startup, recommissioning, and normal operation of the OP27 and OP37.
Details the dimensions, operating elements, connection elements, and communication options for the OP27.
Details the dimensions, operating elements, connection elements, and communication options for the OP37.
Describes optional components like AT expansion slots, Direct Key Modules, and Control Panel Interfaces.
Covers cleaning, battery replacement, and display/back-lighting maintenance for OP27 and OP37.
Provides detailed technical specifications for OP27 and OP37 units, including housing, processor, memory, and power supply.
Details the pin assignments for IF1A, IF2, IF1B, IF3, and LPT interfaces on the operator panels.
Explains how to perform hardware tests, including internal memory, interfaces, keyboard, display, and functional units.
Lists and explains system messages, their causes, and remedies for internal errors and operational issues.
Provides an overview of the SIMATIC HMI documentation structure and target groups for various guides and manuals.
Provides safety guidelines for handling electronic components sensitive to electrostatic discharge.
