11-5
OP27,
OP37 Equipment Manual
Release 05/99
11.3 Other Settings
The
current date and time can be set on the OP in order
, for example, to make
adjustments for summer and winter time. Any changes af
fect all the fields
which display a date and time variable. The display format for date and time is
set in the configuration and cannot be changed later on the OP
.
Step Action
1 Position the cursor on the System Settings standard screen at the Date or
Time numeric input field .
2 Enter the current values. Enter the dots as well. Note the conventions for
date and time since the old value must be deleted before the new one can
be entered.
3 Confirm the entry by pressing:
ENTER
4
or cancel the action by pressing:
ESC
After
setting the time, do not switch the OP off for at least 30 seconds. During
this time the OP saves the date and time in the non–volatile memory
.
The configuration can be loaded onto the OP in up to three languages simulta
-
neously
. It is possible to switch to any of the languages at any time in Online
mode. After switching to another language, all passages of language-dependent
text are displayed in the new language.
Step Action
1 Press the button assigned to the icon shown on the right on the
System Settings standard screen.
I
D
F GBR
USA
E
2 The language is changed cyclically every time the key is pressed.
The
OP saves the current language setting in the non-volatile memory
. The
next time the OP is switched on, all the language-dependent texts are displayed
in the last language set.
Date/Time
Language
System
Settings
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
