To Next PageTo Next PageWhy is the Windows Start screen not visible on my Siemens Monitor?
If the Windows Start screen is not visible and only the extended desktop is displayed, preventing device operation with your Siemens Monitor, this typically occurs when uninstalling the Ethernet Monitor software while using an Ethernet Monitor. To resolve this, do not uninstall using an Ethernet Monitor. Use a different monitor for uninstalling the software.
General| Series | SIMATIC HMI |
|---|---|
| Category | Control Panel |
| Display Type | TFT LCD |
| Touch Screen | Yes (resistive or capacitive, depending on model) |
| Processor | Varies by model (e.g., ARM-based processors) |
| Storage | Varies by model (e.g., Flash memory, microSD card slot) |
| Communication Interfaces | Ethernet, USB |
| Protection Class | IP65 (front panel), depending on model |
| Operating Temperature | 0 to 50°C, -20 to 60°C |
| Power Supply | 24 V DC |
| Memory | 128 MB, 256 MB |
Provides fundamental safety regulations and warnings for device operation.
Details critical information regarding the emergency stop and stop button functionality.
Describes how to use the enabling button for safe operation.
Details the procedure and function of the emergency stop/stop button.
Covers backup, restore, OS update, and project loading procedures.
Explains methods for backing up and restoring HMI device data.
Details the process of updating the HMI device's operating system.
Specifies reaction times and safety characteristics for fail-safe modes.
