Siemens SIMATIC HMI series User Manual

Parameterizing the Mobile Panel
5.8 General settings
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
117
8. If the printer selected can print in color and you wish it to do so, select the "Color" check
box.
9. If you use a Brother HL 2700 printer, select the "CMY" check box.
This allows you to improve the color quality for the printed pages.
10. Confirm your entries with "OK".
The dialog closes.
The printer is now set as specified.
5.8.9 Displaying general system properties
Use this function to display the general system information relating to the operating system,
processor and memory. You will need this information when contacting Technical Support.
Requirement
The Control Panel is open.
Procedure
● Open the "System Properties" dialog using the "System" icon.
The following figure shows an example.
①
Information on the version and the copyright of the operating system
②
Processor information
③
Information on the size of the RAM
The displayed data relates to the specific device. The processor and memory information
may deviate from that for this HMI device.

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB