Siemens SIMATIC HMI series User Manual

Configuring the Mobile Panel
6.1 Configuration in WinCC
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
167
6.1
Configuration in WinCC
6.1.1
Adding a controller to the project
Requirement
● A project is open.
Procedure
1. Double-click "Add new device" in the project tree.
2. Select a controller (CPU) or a fail-safe controller (F-CPU) for an F-system.

Siemens SIMATIC HMI series Specifications

General

Brand	Siemens
Model	SIMATIC HMI series
Category	Control Panel
Language	English