Siemens SIMATIC HMI series User Manual

Overview
1.6 Accessories
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
21
1.6
Accessories
Accessories are not included in the scope of delivery but can be ordered from the following
address:
HMI accessories
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10144445
)
In the Industry Mall you can find the following accessories for the HMI devices of type KTP
Mobile, for example:
● KTP Mobile wall-mounting bracket
● KTP Mobile spare key
● Memory card
● Protective film
1.6.1
KTP Mobile wall-mounting bracket
The wall-mounting bracket holds the Mobile Panel securely in place during stationary
operation.
①
Hooks for the handle on the Mobile Panel
②
Screw flange
③
Safety bar for the Mobile Panel
④
Holding bracket for the connecting cable
The assembly of the KTP Mobile wall-mounting bracket is described in the section
"Assembling the KTP Mobile wall-mounting bracket (Page 47)".

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB