Siemens SIMATIC HMI series User Manual

Overview
1.6 Accessories
Mobile Panels 2nd Generation
22 Operating Instructions, 09/2018, A5E33876626-AC
1.6.2
Fail-safe KTP Mobile spare key
The KTP Mobile spare key is part of the keyswitch for the fail-safe Mobile Panel 2nd
Generation. See section "Keyswitches, function keys and illuminated pushbuttons
(Page 79)".
1.6.3
Protective films
The protective film prevents the touch screen from getting scratched and dirty during
operation. One set of protective film contains 10 protective films.
● Protective film 4" touch devices, type 13
● Protective film 7" touch devices, type 13
● Protective film 9" touch devices, type 13
1.6.4
Storage media
You can use the storage media to back up Mobile Panel data and copy data to the Mobile
Panel. Use the following storage media:
● SIMATIC HMI Memory Card
Siemens AG has approved the use of SD memory cards in the Mobile Panel.
● USB flash drive
The USB flash drive must be suitable for industrial applications. The storage medium is
inserted in the port on the left of the device.

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB