Siemens SIMATIC HMI series - Specifying the Computer Name of the HMI Device

Parameterizing the Mobile Panel
5.13 Configuring network operation
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
131
Configuration includes:
● Specifying the computer name of the HMI device
● Specifying the IP address and name server
● Specifying the logon data
● Configuring e-mail
Parameterization is described from section
"Specifying the computer name of the HMI device (Page 131)" on.
5.13.2 Specifying the computer name of the HMI device
You can use this function to assign a computer name to the HMI device. The computer name
is used to identify the HMI device in the local network.
Requirement
The Control Panel is open.
NOTICE
Computer name must be unique
Communication errors may occur in the local network if you assign a computer name more
than once.
Enter a unique computer name in the ""Device name"" text box.
Procedure
1. Open the "System Properties" dialog using the "System" icon.
2. Change to the "Device Name" tab.
①
Computer name of the HMI device
②
Brief description of the HMI device (optional)
3. Enter the computer name for the HMI device in the "Device name" text box. Enter the
name without spaces.