Safety instructions
2.4 Notes about usage
Mobile Panels 2nd Generation
Operating Instructions, 09/2018, A5E33876626-AC
37
HMI device approved for indoor use only
The HMI device may be damaged if operated outdoors.
Operate the HMI device indoors only.
Note
Operate the device only in a normal atmospheric environment
The technical characteristics of the device described in the operating instructions are
guaranteed if you operate the device in normal ambient air conditions with usual air
composition.
Note
The device is intended for op
eration in an SELV/PELV circuit according to IEC/EN 61131 or
61010-2-201 in a dry environment, which means a dry environment inside the
Additional information is available in the section "
Operating Conditions (Page 224)".
The HMI device is designed for industrial applications. It conforms to the following standards:
● Requirements for emitted interference EN 61000-6-4 +A1
● Requirements for interference immunity EN 61000-6-2
Under certain circumstances you can use the HMI device in a mixed-use zone. A mixed-use
zone is used for housing and commercial operations that do not have a significant impact on
residents.
When you use the HMI device in a mixed-use zone, you must ensure that the limits of the
generic standard EN 61000-6-3 regarding emission of radio frequency interference are
observed. Suitable measures for achieving these limits for use in a mixed area, for example,
include the use of filters in power supply lines.
Individual acceptance is required.
To Next Page
Loading...
Need help?
General
