Siemens SIMATIC OP 270 - Behavior of the Recipe View in Runtime; Recipe Data Record Administration

Operating recipes
10.6 Recipe data record administration
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
10-15
10.5.2 Behavior of the recipe view in Runtime
Screen change
If you change to another screen and have not yet saved changes to the recipe data in the
recipe view, you will be prompted to save the recipe data. The recipe name and the name of
the recipe record are displayed to show which recipe data have not been saved yet.
If you change to a process screen that contains a recipe view with loaded recipe data, the
recipe data will be automatically updated.
Operating the recipe view with softkeys
The recipe view can be operated with function keys, e.g. when the HMI device does not have
touch functionality. System functions allow you to assign functions such as "Save data
record" to the function keys of the HMI device.
10.6 Recipe data record administration
10.6.1 Recipe data record administration
Recipe data record administration
You can perform the following tasks in Runtime depending on the configuration:
• Create new recipe data records
• Copy recipe data records
• Edit recipe data records
•
!
e-est recipe data records
You can edit recipe data records in the recipe view or screen, or import recipe data records
from a CSV file.
Creating new recipe records
1. Select the recipe on the HMI device in which you want to create a new recipe data
record.
2. Use the "Add data record" button in the recipe view or the corresponding button on the
HMI device that is configured with this function.
A new data record with the next available number will be created. If you change the new
data record number of an existing data record number, the data record is overwritten.
3. Enter a name for the recipe data records.