New features and changes as compared to previous
versions
6
Note
You may also want to read the information provided in the previous versions.
6.1 Version 9.0
6.1.1 What's New in Version 9.0?
● Support for new hardware
– S7-410 CPU
CPU 410-5H V8.2, MLFB: 6ES7 410-5HX08-0AB0
CPU 410E, MLFB: 6ES7410-5HM08-0AB0
– Distributed I/O system ET 200SP HA
Support of all modules released for PCS 7 V9.0.
Support von time stamping (SOE), IO redundancy, multiHART, S2 and R1 redundancy.
– Compact Field Unit PA, MLFB: 6ES7 655-5PX11-0XX0
– Scalance XF204-2BA V3.1, MLFB 6GK5 204-2AA00-2GF2
– Scalance XF204-2BA DNA V3.1, MLFB 6GK5 204-2AA00-2YF2
– SITOP PSU8600 and UPS1600
– IE/PB Link PN IO V3.0, MLFB 6GK1 411-5AB10 with bus adapters
● Behavior changes
– In Asset Management a device is not shown as passive until all slots in use have the
passive status.
6.1.2 Changes in version 9.0
● Improved behavior of diagnostics blocks with higher-level error
PCS 7 Basis Library Readme V9.0 SP1 (online)
Readme, V9.0 SP1, A5E42614246-AA 15
To Next Page
Loading...
Need help?
General
