Siemens Simatic S7-1500 - Page 133

Technical specifications
CPU 1512C-1 PN (6ES7512-1CK00-0AB0)
Manual, 09/2016, A5E35306440-AB
133
6ES7512-1CK00-0AB0
Digital output functions, configurable
Switch at comparison values
Yes; as output signal of a high-speed counter
PWM output
Yes
•
Number, max.
4
•
Configurable cycle duration
Yes
•
On-load factor, min.
0%
•
On-load factor, max.
100%
•
Resolution of the on-load factor
0.0036 %; with S7 analog format, min. 40 ns
Frequency output
Yes
Pulse train
Yes; including for pulse/direction interface
Switching capacity of outputs
with resistive load, max.
0.5 A; 0.1 A at high-speed output, i.e. when a
high-speed output is used; refer to manual for
details
with lamp load, max.
5 W; 1 W with high-speed output, i.e. when a
high-speed output is used; refer to manual for
details
Load resistance range
Low limit
48 W; 240 W with high-speed output, i.e. when a
high-speed output is used; refer to manual for
details
High limit
12 kΩ
Output voltage
Type of output voltage
DC
for signal "0", max.
1 V; with high-speed output, i.e. when a high-
speed output is used; refer to manual for details
for signal "1", min.
23.2 V; L+ (-0.8 V)
Output current
for signal "1" rated value
0.5 A; 0.1 A with high-speed output, i.e. when a
high-speed output is used; refer to manual for
details
for signal "1" permissible range, min.
2 mA
for signal "1" permissible range, max.
0.6 A; 0.12 A with high-speed output, i.e. when a
high-speed output is used; refer to manual for
details
for signal "0" residual current, max.
0.5 mA
Output delay with resistive load
"0" to "1", max.
100 µs
"1" to "0", max.
500 μs; load-dependent
for technological functions
•
"0" to "1", max.
5 µs; dependent on output used, see additional
description in the manual
•
"1" to "0", max.
5 µs; dependent on output used, see additional
description in the manual