Siemens Simatic S7-1500R - Product Overview; Properties; CPU Display; Supply Voltage

Product overview
2.3 Hardware properties
CPU 1515R-2 PN (6ES7515-2RM00-0AB0)
14 Equipment Manual, 11/2019, A5E42009914-AB
Properties
CPU 1515R-2 PN has the following technical properties:
Property
Description
Additional information
CPU display
All CPUs of the redundant system S7 1500R/H have a
display with plain text information. The display provides
you with diagnostic messages as well as information
about the article number, the firmware version and the
serial number of the CPU.
You can also view and assign the IP addresses, the
PROFINET device name and the redundancy ID of the
CPU. The system IP address can be viewed via
STEP 7 but not in the display.
In addition to the functions listed here, a large number
of other functions are available on the display. These
additional functions are described in the SIMATIC S7
1500 Display Simulator.
• Redundant System S7-1500R/H
(
https://support.industry.siemens.
com/cs/ww/en/view/109754833)
System Manual
• SIMATIC S7-1500 Display Simu-
lator
(
http://www.automation.siemens.
com/salesmaterial-as/interactive-
manuals/getting-started_simatic-
s7-1500/disp_tool/start_de.html)
Supply voltage
The 24 V DC supply voltage is fed via a 4-pin plug
located on the front of the CPU.
• Section Connecting (Page 25)
• Redundant System S7-1500R/H
(https://support.industry.siemens.
com/cs/ww/en/view/109754833)
System Manual