Siemens Simatic S7-1500R

Technical specifications
CPU 1515R-2 PN (6ES7515-2RM00-0AB0)
40 Equipment Manual, 11/2019, A5E42009914-AB
Article number
6ES7515-2RM00-0AB0
Media redundancy
• Switchover time on line break, typ.
200 ms; PROFINET MRP
• Number of stations in the ring, max.
50; Only 16 are recommended, however
Isochronous mode
Isochronous operation (application synchro-
nized up to terminal)
No
Equidistance No
S7 message functions
Number of login stations for message func-
tions, max.
64
Program alarms
Yes
Number of configurable program messages,
max.
10 000; Program messages are generated by the
"Program_Alarm" block, ProDiag or GRAPH
Number of loadable program messages in
RUN, max.
5 000
Number of simultaneously active program
alarms
• Number of program alarms
800
• Number of alarms for system diagnostics
200
Test commissioning functions
Joint commission (Team Engineering)
No
Status block
Yes; up to 8 simultaneously
Single step
No
Number of breakpoints 8; Breakpoints are only supported in RUN-Solo
status
Status/control
• Status/control variable
Yes
• Variables
Inputs/outputs, memory bits, DBs, distributed
I/Os, timers, counters
• Number of variables, max.
– of which status variables, max.
200; per job
– of which control variables, max.
200; per job
Forcing
• Forcing
Yes
• Forcing, variables
Peripheral inputs/outputs
• Number of variables, max.
200
Diagnostic buffer
• present
Yes
• Number of entries, max.
3 200
– of which powerfail-proof
500