Siemens SIMATIC S7-1500T Reference Manual

A5E33284667-AA Page 74
Extended instructions
Basic instructions
Communication
Technology
S7-300
S7-400
S7-1200 S7-1500
Description LAD/FBD
STL
(not S7-1200)
SCL
Instructions with lower memory requirements, but also less
functional scope.
Recommendation: Use the instructions
specified above. You cannot apply the
instructions decentrally in an ET 200.
✔
Configure communication parameters dynamically
PORT_CFG
✔
Configure serial transmission parameters dynamically
SEND_CFG
✔
Configure serial receive parameters dynamically
RCV_CFG
✔
Transmit send buffer data
SEND_PTP
✔
Enable receive messages
RCV_PTP
✔
Delete receive buffer
RCV_RST
✔
Query RS 232 signals
SGN_GET
✔
Set RS 232 signals
SGN_SET
USS communication
S7-300/400: Commands for ET200SP CM PtP
✔
Edit communication via USS network
USS_PORT
✔
✔
✔
✔
Communication via USS network (16 drives)
USS_Port_Scan
✔
Communication via USS network (31 drives)
USS_Port_Scan_31
✔
Prepare and display data for the drive
USS_Drive
✔
✔
✔
✔
Data exchange with the drive (16 drives)
USS_Drive_Control
✔
Data exchange with the drive (31 drives)
USS_Drive_Control_31

Siemens SIMATIC S7-1500T Specifications

General

Brand	Siemens
Model	SIMATIC S7-1500T
Category	Controller
Language	English