vii
S7-300,
Installation and Hardware
EW
A 4NEB 710 6078-02a
Please
contact your local Siemens representative if you have any queries
about the products described in this manual. A list of Siemens representatives
worldwide is contained in the appendix to this manual.
If you have any questions or suggestions concerning this manual, please fill
in the form at the end of this manual and return it to the specified address.
Please feel free to enter your personal assessment of the manual in the form
provided.
W
e of
fer a range of courses to help get you started with the SIMA
TIC S7 pro
-
grammable controller
. Please contact your local training center or the central
training center in Nurember
g, D-90327 Germany
, T
el. +49 91
1 895 3154.
Y
ou can receive up-to-date information on SIMA
TIC products from the fol
-
lowing sources:
On the Internet at http://www
.ad.siemens.de/
V
ia fax polling number +49–8765-93 00-55 00
In addition, the SIMA
TIC Customer Support provides up-to-date information
and download facilities for users of SIMA
TIC products:
On the Internet at http://www
.ad.siemens.de/simatic–cs
V
ia the SIMA
TIC Customer Support mailbox under the following num
-
ber: +49 - 91
1 - 895 - 7100
For dialing into the mailbox, use a modem of up to V
.34 (28.8 Kbaud) and
set the following parameters: 8, N, 1, ANSI, or alternatively use ISDN
(x.75, 64 Kbit).
Y
ou can reach the SIMA
TIC Customer Support by telephone at
+49 (91
1) 895-7000 and by fax at +49 (91
1) 895-7002. Queries can also be
addressed to us by Internet mail or by mail to the mailbox specified above.
Additional
Assis
-
tance
Up-to-date
Information
Preface
To Next Page
Loading...
