Siemens SIMATIC Equipment Manual

Product overview
2.1 Properties
I/O device digital inputs DI 16x24VDC M12-L 8xM12 (6ES7141-6BH00-0BB0)
Equipment Manual, 06/2021, A5E46570510-AB
11
Properties
The I/O device has the following technical properties:
• 16 digital inputs
• M12 sockets for connection of sensors
• 24 V DC supply voltage
• Integrated switch with 2 ports
• Configurable input delay 0.05 to 20 ms (per channel)
• Configurable diagnostics can be set for each channel
• Configurable hardware interrupt can be set for each channel
• Suitable for switches and proximity switches
• Dimensions 45 x 200 mm
The I/O device supports the following functions:
• Firmware update
• Identification and maintenance data I&M0 to I&M3
• Isochronous mode
• Value status (Quality Information)
• Module-internal Shared Input (MSI)
Accessories
The following components are included in the I/O device package:
• Identification labels
Other components
The following component can be ordered as spare part:
• Identification labels
The following components can be ordered as accessories:
• Mounting rail
• Connectors and cables
• M12 sealing cap
See also
You can find additional information on the accessories in the ET 200eco PN M12-L distributed
I/O system system manual.

Siemens SIMATIC Specifications

General

Product type designation	SIMATIC
CPU	Varies by model
Memory	Varies by model
Input/Output	Varies by model
Communication	Varies by model
Programming Language	STEP 7
Operating Temperature	0°C to 60°C (varies by model)
Protection Class	IP20
Category	Programmable Logic Controller (PLC)