Siemens SIMATIC - Page 34

Technical specifications
I/O device digital inputs DI 16x24VDC M12-L 8xM12 (6ES7141-6BH00-0BB0)
Equipment Manual, 06/2021, A5E46570510-AB
33
Article number
6ES7141-6BH00-0BB0
Interrupts/diagnostics/status information
Alarms
• Diagnostic alarm
Yes; Parameterizable
• Maintenance interrupt
Yes; Parameterizable
• Hardware interrupt
Yes; Parameterizable
Diagnoses
• Diagnostic information readable
Yes
• Monitoring the supply voltage
Yes
–
parameterizable
Yes
• Wire-break
Yes; DI, input current < 0.3 mA, per channel
• Short-circuit encoder supply
Yes; Per channel group
Diagnostics indication LED
• RUN LED
Yes; green LED
• ERROR LED
Yes; red LED
• MAINT LED
Yes; Yellow LED
• Channel status display
Yes; green LED
• for channel diagnostics
Yes; red LED
• Connection display LINK TX/RX
Yes; green LED, only link
Potential separation
between the load voltages
Yes
between Ethernet and electronics
Yes
Potential separation channels
• between the channels
No
• between the channels and the power supply
of the electronics
No
Isolation
tested with
• 24 V DC circuits
707 V DC (type test)
• Test voltage for interface, rms value [Vrms]
1 500 V; According to IEEE 802.3
Standards, approvals, certificates
Suitable for safety-related tripping of standard
modules
Yes; From FS01
Highest safety class achievable for safety-
related tripping of standard modules
• Performance level according to ISO 13849-1
PL d
• Category according to ISO 13849-1
Cat. 3
• SILCL according to IEC 62061
SILCL 2