Siemens SINAMICS G120D - Page 46

Installation
3.11 Connections and cables
SINAMICS G120D converter
46 Getting Started, 07/2016, FW V4.7 SP6, A5E38556189B AA
Table 3- 13 Fibre optic connectors
Connector
Order number
IE SC RJ POF PLUG PRO
6GK1900-0MB00-6AA0
IE SC RJ PCF PLUG PRO 6GK1900-0NB00-6AA0
Table 3- 14 Mains connector
Power rating
cable size
Order number
0.75 kW … 1.50 kW
2.5 mm
2
(14 AWG)
3RK1911-2BE50
3.00 kW … 4.00 kW 4 mm
2
(12 or 10 AWG) 3RK1911-2BE10
5.50 kW … 7.50 kW
6 mm
2
(10 AWG)
3RK1911-2BE30
Order motor connector including temperature sensor and motor holding brake via solution
partner:
Solution partner (https://www.automation.siemens.com/solutionpartner/partnerfinder/Partner-
Finder.aspx?lang=en)
Cable lengths
Table 3- 15 Maximum cable lengths
Cable
Screening
Max. length
Motor
1)
Screened
15 m (49 ft)
Unscreened
30 m (98 ft)
Temperature sensor
1)
Screened
15 m (49 ft)
Unscreened
30 m (98 ft)
Motor holding brake
1)
Screened
15 m (49 ft)
Unscreened
30 m (98 ft)
Digital inputs
Screened
30 m (98 ft)
Digital outputs
Screened
30 m (98 ft)
Analog input
Screened
30 m (98 ft)
Encoder
Screened
30 m (98 ft)
1)
The motor, temperature sensor and motor holding brake are connected through a hybrid cable to
the inverter using a Harting connector.