Siemens SINAMICS V20 Operating Manual

___________________
___________________
___________________
___________________
___________________
___________________
SINAMICS
SINAMICS V20 multi-pump control
Operating Manual
05/2018
A5E43416874
-002
Overview
1
Pump switch-in/switch-out
2
Stop mode
3
Pump switchover
4
Service mode
5
Faults and alarms
6

Siemens SINAMICS V20 Specifications

General

Power Range	0.12 kW to 30 kW
Overload Capacity	150% for 60 seconds
Protection Class	IP20
Storage Temperature Range	-40°C to +70°C
Altitude	Up to 1000 m without derating
Input Voltage	3AC 380 V to 480 V
Output Voltage	0 V to Input Voltage
Control Modes	V/f control
Ambient Temperature Range	-10°C to +60°C
Relative Humidity	5% to 95%, non-condensing
Communication Interfaces	Modbus RTU
Braking Resistor	Optional external