Need help?Do you have a question about the Siemens SINAMICS G180 and is the answer not in the manual?
Explains the warning symbols and their meanings for safety.
Defines the necessary qualifications for operating personnel.
Outlines guidelines for correct product usage and handling.
Describes the purpose and scope of the document.
Specifies the document's applicability to product versions.
Explains typographical conventions used in the manual.
Illustrates how buttons on the inverter display are represented.
Details the meaning and function of specific display buttons.
Critical safety procedures for working with electrical equipment.
Emphasizes using only approved components for system integration.
Identifies hazardous zones within the inverter.
General safety guidelines for personnel operating the device.
Provides guidelines to prevent ESD damage to electronic components.
Warns about EMF hazards and necessary precautions.
Details safety precautions regarding RF devices near the inverter.
Details necessary protection for external control voltage.
Lists potential hazards that remain after safety measures.
Guides on updating software and manual versions.
Explains how to identify product order numbers and types.
Describes optional add-on components for the inverter.
Details available fieldbus interfaces for communication.
Provides instructions and warnings for safely moving the inverter.
Gives guidelines for proper storage conditions to prevent damage.
Outlines requirements for Electromagnetic Compatibility during installation.
Provides fundamental guidelines for inverter installation.
Describes the procedure for installing compact inverter units.
Guides on installing inverter units within cabinets.
Provides general rules and precautions for electrical connections.
Explains how to protect the inverter from electrical faults.
Details compatible line supply types and connection procedures.
Guides on selecting and connecting motors to the inverter.
Explains the use and connection of external control voltages.
Outlines initial checks before powering the unit.
Details checks after power application but before motor connection.
Describes final tests with the motor connected to the load.
Explains the inverter's display interface and status indicators.
Provides instructions for powering the inverter on and off.
Details various commands for controlling the inverter's operation.
Overviews the available communication interfaces for the inverter.
Describes configuration options for standard operating modes.
Details configuration options for NAMUR operating modes.
Guides on managing external connections and signals.
Explains various special functions available on the inverter.
Provides general guidance on routine device maintenance.
Guides on how to replace a compact device unit.
Outlines maintenance procedures for water cooling systems.
Warns against using unauthorized spare parts.
Provides information on how to request and order spare parts.
Explains how to access and interpret the inverter's event log.
Provides contact details for technical support.
Guides on finding local contacts for service and support.
Specifies environmental conditions for transport.
Provides dimensions for compact unit frame sizes.
Lists frame sizes for cabinet units.
Details environmental conditions required for inverter operation.
Specifies torque values for power cable connections.
Provides technical specifications for control cable terminals.
Details PTC thermistor input specifications.
Provides technical data for water cooling systems.
Lists permissible substance limits for cooling water.
Specifies temperature thresholds for fan control.
Provides derating information for output parameters.
Derating factors for current based on altitude and temperature.
Derating factors for voltage based on installation altitude.
To Next Page
General