Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007
9
These Operating Instructions describe the device and provide you with information about
handling it - from the initial shipment up to disposal. Keep these instructions for later use.
Read these Operating Instructions and comply with the information provided in them. In this
way you can ensure safe, problem-free operation and a long service life.
Safety information and handling-related warnings are provided in these Operating
Instructions. For your own safety, the safety of other persons and to avoid material damage,
carefully follow these instructions when carrying out any work.
If you have suggestions for improving the document, please contact our Service Center.
This document is applicable for SINAMICS G180 T7 (not capable of energy recovery), Order
number "6SE01…", from software version 11C0242/CF78
Text format features
Text format features
You can find the following text format features in these instructions:
1. Handling instructions are always formatted as a numbered list. Always perform the steps
in the order given.
● Lists are formatted as bulleted lists.
– Lists on the second level are hyphenated.
Note
The note provides you with additional information about the product itself, handling the
product
- and the relevant documentation.
To Next Page
Loading...
