Need help?Do you have a question about the Siemens simovert master drive and is the answer not in the manual?
General| Output Voltage | 0 to Input Voltage |
|---|---|
| Frequency | 0 Hz to 650 Hz |
| Control Method | Vector control |
| Communication Interfaces | CANopen, USS |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit |
| Enclosure Rating | IP20, IP21, IP54 |
| Ambient Temperature | 0 °C to +40 °C (without derating) Up to +50 °C (with derating) |
| Certifications | CE, UL, cUL |
| Cooling Method | Forced air cooling (fan-cooled), liquid cooling for high power units |
Essential safety and operational guidelines for using the drive converters.
Details the various applications for the SIMOVERT MASTER DRIVES.
Explains how the drive converter can be controlled and its interface options.
Provides instructions and considerations for physically mounting the drive converter.
Outlines the procedures for making electrical power connections to the drive.
Describes the function and use of the control panel buttons and displays.
Details procedures for replacing common components like fans, fuses, and modules.
Explains how to install and configure optional boards in the electronics box.
Covers power section options like braking units and reactors.
Lists spare parts specifically for the 510 V to 620 V DC converter range.
Provides guidelines for de-rating performance based on ambient temperature.
Contains a glossary of abbreviations used throughout the manual.
To Next Page