Siemens simovert master drive - Chapter 10: Appendix

12.96 Appendix
Siemens AG 6SE7087-6BM70
10-1
SIMOVERT MASTER DRIVES Operating Instructions
10 Appendix
10.1 Index
−
A
−
Addresses 11-1
Applications 1-1
Auxiliary power supply/main contactor or bypass
contactor 3-4
−
B
−
Bypass- and output contactor 6-9
Bypass contactor (electrical DC link coupling) 6-9
Bypass contactor with I/R unit 6-10
Bypass contactor without I/R unit 6-9
−
C
−
Connecting and disconnecting individual converters
to the DC bus 6-11
Connecting-up 3-1
Converter 510 V to 620 V DC 7-1
Converter 675 V to 780 V DC 7-4
Converter 890 V to 930 V DC 7-9
−
D
−
De-rating at installation altitudes > 1000 m above
sea level 9-7
De-rating for an increased cooling medium
temperature 9-7
Description 1-1
Dimension drawings 2-4
Displays 4-2
dv/dt filter 6-7
−
E
−
Environmental friendliness 8-1
− I −
Interface boards 6-3
Isolating amplifiers 6-4
− M −
Maintenance 5-1
Maintenance requirements 5-1
Mode of operation 1-1
Mounting 2-2
−
O
−
Operator control 4-1; 6-12
Operator control elements 4-1
Options 6-1
Options which can be integrated into the electronics
box 6-1
Output contactor 6-11
Output reactor 6-6
Output reactor, dv/dt filter 6-5
−
P
−
Power connections 3-2
Power section 6-4
Power supplies 6-3
Protective conductor connection 3-4
−
R
−
Removing and installing the module busbars 5-4
Replacing boards 5-5
Replacing boards in the electronics box 5-8
Replacing components 5-2
Replacing SML and SMU 5-3
Replacing the balancing resistor 5-4
Replacing the capacitor bank 5-3
Replacing the fan 5-2
Replacing the IGBT modules 5-7
Replacing the IGD 5-6
Replacing the IVI / IPI (type of construction M) 5-5
Replacing the PMU (Parameterization Unit) 5-8
Replacing the PSU 5-6
Replacing the snubber resistor 5-7
Replacing the starting capacitor 5-3
Replacing the VDU and VDU resistor 5-6