Siemens SINUMERIK 810D

Overview of Alarms 11/2006
HMI alarms
2-630
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
101624 Request not supported
Definitions: --
Remedy: --
101625 No write access with active controller.
Definitions: --
Remedy: --
101626 Unknown unit.
Definitions: --
Remedy: --
101627 Write access only in start-up state Encoder (p10=4).
Definitions: --
Remedy: --
101628 Write access only in start-up state Motor (p10=3).
Definitions: --
Remedy: --
101629 Write access only in start-up state Power Section (p10=2).
Definitions: --
Remedy: --
101630 Write access only in rapid start-up state (p10=1).
Definitions: --
Remedy: --
101631 Write access only in start-up state Ready (p10=0).
Definitions: --
Remedy: --
101632 Write access only in start-up state Parameter Reset (p10=30).
Definitions: --
Remedy: --
101633 Write access only in start-up state Safety (p10=95).
Definitions: --
Remedy: --
101634 Write access only in start-up state Techn.Application/Units (p10=5).
Definitions: --
Remedy: --
101635 Write access only in start-up state (p10 unequal 0).
Definitions: --
Remedy: --