Siemens SINUMERIK 810D

Overview of Alarms 11/2006
HMI alarms
2-632
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
101647 Parameter must not be written in download.
Definitions: --
Remedy: --
101648 Transfer of the control right is disabled via BI p806.
Definitions: --
Remedy: --
101649 Desired BICO interconnection impossible, since BICO output does not
supply float value
Definitions: --
Remedy: --
101650 Free BICO interconnection disabled via p300,p400 oder p922.
Definitions: --
Remedy: --
101651 No access method defined.
Definitions: --
Remedy: --
101652 Below currently valid limit
Definitions: --
Remedy: --
101653 Above currently valid limit
Definitions: --
Remedy: --
101654 Parameter not accessible from BOP.
Definitions: --
Remedy: --
101655 Parameter not readable from BOP.
Definitions: --
Remedy: --
101656 Write access not permitted.
Definitions: --
Remedy: --
102000 Error %1 %2
Parameters: %1 = --
%2 = --
Definitions: --
Remedy: --