Siemens SINUMERIK 810D Diagnostic Manual

HMI alarms
11/2006 Overview of Alarms
2-685
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
142000 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user uses "Request Support" function.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142001 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user uses "Request Support" function.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142002 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user uses "Request Support" function.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142003 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user uses "Request Support" function.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142004 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user uses "Request Support" function.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal

Siemens SINUMERIK 810D Specifications

General

Brand	Siemens
Model	SINUMERIK 810D
Category	Control Unit
Language	English