Siemens SINUMERIK 810D - Page 686

Overview of Alarms 11/2006
HMI alarms
2-686
© Siemens AG, 2006. All rights reserved
SINUMERIK, SIMODRIVE Diagnostics Manual (DA), 11/2006 Edition
142005 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142006 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142007 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142008 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142009 Machine ready for remote diagnostics! %1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Are triggered in "PLC Controlled" mode
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal
142010 Operator at the machine is waiting for support via remote diagnostics!
%1 %2 %3 %4
Parameters: %1 = IP address for existing Internet connection via modem
Definitions: Will be triggered in "User Controlled" mode, if user explicitely selects and starts a host object.
Reaction: Alarm display.
Remedy: Acknowledge alarm
Program
Continuation:
Internal