Siemens SINUMERIK 840C - Page 365

10 Data fields 01.91
10.2.4 User interface
Data for the chained magazine
Data
word
No.
High-order byte (DL)
Bit 15
Low-order byte (DR)
Bit 15
Bit 15
Bit 0
Bit 0
Bit 0
DW 77
DW 78
DW 79
Data word number within the magazine table (see D 71.8)
Magazine location number of the tool found (see D 71.8)
Current actual position of the assigned magazine (see D 71.8)
where tool was found
10–36 © Siemens AG 1991 All Rights Reserved 6FC5 197-0AA40-1BP1
SINUMERIK 840/880 (PJ)