Siemens SINUMERIK 840D Diagnostics Guide

1 Alarms 10.04
1-660
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
400902 Parameter ChanNo impermissible in FC 9
Definitions: The parameterized channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
400903 Parameter IntNo impermissible in FC 9
Definitions: The parameterized interrupt does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
401502 Impermissible axis no. parameter in FC 15
Definitions: The parameterized axis does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
401602 Impermissible axis no. parameter in FC 16
Definitions: The parameterized axis does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
401702 Impermissible spindle IF no. parameter in FC 17
Definitions: The parameterized spindle does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
401805 Impermissible axis no. parameter in FC 18
Definitions: The parameterized axis / spindle does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.
401901 Parameter BAGNo impermissible in FC19
Definitions: The parameterized mode group, channel does not exist.
Reactions: - Alarm display.
Remedy: Correct the parameter.
Program Continuation: Switch control OFF - ON.

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB